It was moving and when I got to traffic, it stalled and wouldn't budge even thought the lights were still on. Sai just a couple of questions. I doesn't feel the car is powerful while trying to accelerate quickly although it has 270hp. He was not confident in giving me any guarantee for his work and his price was very high. I pulled out into traffic today and almost got clobbered by another car because my car was stalling and hesitating 5 to 10 seconds at at time in the middle of the road! The list of automotive Makes at the right edge of the screen.
Turned off the car and waited for a minute. I've also read that if the Stepper motor is not replaceable replacing the CamShaft and crankshaft sensors may have something to do with it as it sends speed information to the transmission. . I have the Crankshaft sensor out but it doesn't really look bad. Automatic Transmission 2005 Nissan Murano Automatic Transmission Consumer Complaints Complaint Number: 10420740 Incident Date: August 17, 2009 Date Added to File: August 19, 2011 Description of the Complaint: The contact owns a 2005 nissan murano.
It was a very scary moment because many cars coming close hitting me and other cars almost collided into each other. Scenario that made me to scan the car for issues. Good Luck and let me know how you make out, I'm pretty sure this is the solution. Complaint Number: 10214420 Incident Date: January 9, 2008 Date Added to File: January 10, 2008 Description of the Complaint: My car will not accelerate when I put on the gas. Do you mean that the component needs to be changed or the error code is due to an issue in another component like solenoids or fluid pressure etc? Finally I called desperately begging for them to come and after about 45minutes the tow company truck showed up. I am parking the car until I can trade it in. Look up the other , please use the search box.
I had to tow the car to the nearest nissan dealer across the town. Test the solenoid and stepper motor for their function. But everything points to a low oil pressure causing the problem. Car had 66,000 miles on it which was 6,000 miles over warranty. If is The connector in good condition. Code P0345 is for camshaft position on bank 2, which is in the front of the engine compartment. This could have resulted in injury or death and nissan refuses to acknowledge this ticking time bomb in their muranos.
Engine was working fine, but, as I found out later, my cvt transmission have self destruct, due to a code sent from the tcm module. Insert key all the way into the ignition, do not turn remove key. Complaint Number: 10157644 Incident Date: May 15, 2006 Date Added to File: May 16, 2006 Description of the Complaint: : the contact stated while driving 60 mph on the highway, the vehicle stalled without warning. The vehicle was not repaired. And also, I checked the transmission fluid level after five to seven minutes of starting the car and it is a little above the second bent from bottom of the stick. I was searching what kind of problem could I possibly have, then I came across alot of people have the same issue like I did. I turned off the car and after an hour started it and this time, the car moved.
Engine was working fine, but, as I found out later, my cvt transmission have self destruct, due to a code sent from the tcm module. You may have to tell a little white lie and tell them you have been living with the problem for quite a while because no one has been able to solve the problem and you have just now heard of this bulletin. The two codes are listed in picture for causes, but 178 is the step motor which means it works okay electrically, but mechanically there is something wrong. Is the inspection result normal? I just got out of surgery a week ago. Is the inspection result normal? From that day to now I have to reset the system at least once every 2 weeks. So, I decided to sell the car. Though I changed the stepper motor, the codes came back after couple of weeks.
They reset the system and pulled the code from the unit. If you are living in U. So something in the pressure system malfunctioning??? This vehicle is delivered to you with confidence. You transmission fluid level is okay. Or a transmission specialist would be able to fix the issues? The solution is here : Nissan Murano P1700 Possible Solution : The crankshaft sensor signals the fuel injection computer or the ignition control when the cylinders are firing. If you know where the sensor is, you only have to unclip the old sensor and replace it with a new one.
No other options given as they do not repair - only replace transmissions. S, getting the transmission fixed or rebuilt should not be a problem. Put the car in 'P', did not turnoff the engine, and put the car back into 'D' to drive again. The glass is wavy, and it is hard to see out of. Well exactly thats pretty much what we want to do, my dad used to be a Mechanic so we have the programs to follow the proper steps.